During the period of June 16, 2025, through June
20, 2025, SMCMUA will be performing routine hydrant maintenance and
flushing on the below streets and surrounding areas between the hours of 8:00 AM and 4:00 PM.
Airport Road
Albert Avenue
Arbor Way
Barberry Road
Bennington Road
Bradwahl Drive
Brothers Place
Canfield Road
Chatham Walk
Chimney Ridge Drive
Colonial Drive
Concord Lane
Constitution Way
Crescent Drive
Crestview Terrace
Dwyer Lane
Easley Terrace
Fairfield Drive East
Fairfield Drive West
Fanok Road
Florence Avenue
Fox Chase Lane
Gullick Road
Hearthstone Way
Herms Place
Hillview Terrace
Independence Way
Johnston Drive
Old Glen Road
Old Turnpike Road
Overlook Road
Pear Street
Powder Horn Drive
Punch Bowl Road
Ridge Road
Sand Hill Road
Shephard Place
South Street
Symor Drive
Turtle Road
Weathervane Drive
Woodland Avenue
York Road
What to Expect:
While hydrant flushing typically will not interrupt your water service, you may
notice a temporary drop in water pressure while crews are working in your area.
There is also the possibility that water may become temporarily discolored. This
is normal. The discolored water does not pose a health hazard; however, iron
(red water) and manganese (black water) may be stirred up within the system
during the flushing procedures. If this happens, simply let your water run until
it runs clear.
Customer Tips:
-
Avoid running your tap water and using the
washing machine or dishwasher while crews are flushing your area. This will
reduce the chance of pulling discolored water into your home.
-
If discolored water occurs, simply run the
cold water for a few minutes until it clears. This will allow the sediment
to work its way out of your pipe.
-
Check for discolored water before using the
washing machine or dishwasher. Wait until the water runs clear before doing
laundry or running the dishwasher. NOTE: If your laundry does become
stained, do not put your laundry into the dryer. Re-wash laundry immediately
and add a rust remover.
-
In some cases, slight discoloration might
linger for a few hours. This discoloration affects the appearance of the
water and does not affect water quality. No health hazards are associated
with discolored water from hydrant flushing.
-
If water pressure or water volume seems low
after flushing has been completed, check your faucet screens (aerators) for
trapped particles.
SMCMUA apologizes for the
inconvenience. Thank you for your patience.
To
receive similar water related alerts, please
UPDATE YOUR ACCOUNT INFORMATION and
register for Smart911.
(Updated: June 17, 2025, at 8:30 AM)
Return to Home
|